Back to Mixes

Total 86 items.
Property GroupPropertyMix 32Mix 35Mix 36Mix 37Mix 38Mix 40Mix 41Mix 42Mix 43Mix 44Mix 45Mix 46Mix 47Mix 48Mix 50Mix 52Mix 55Mix 59Mix 60Mix 61Mix 62Mix 81Mix 82Mix 83Mix 84Mix 86Mix 87Mix 88Mix 92
                               
Fresh PropertiesConsistency (flow table)/slump140---------------------136132--215167-
Fresh PropertiesSlump (Flow test)---190---23200--------------------
Fresh PropertiesYield Stress (stress @ low shear)-----------------------------
Fresh PropertiesViscosity (@ certain RPM <-> typical pump rpms)-----------------------------
Fresh PropertiesShear Thinning/Thickening (viscosity @ high shear)-----------------------------
Fresh PropertiesCritical Strain-----------------------------
Fresh PropertiesFlow Point-----------------------------
Fresh PropertiesViscosity Recovery (time, yes/no)-----------------------------
Fresh PropertiesStorage & Loss Modulus-----------------------------
Fresh PropertiesBulk Density--2.382---------2.34----------------
Fresh PropertiesAir Content-----------------------------
Fresh PropertiesWorkable Life and Correction Time-----------------------------
Fresh PropertiesSetting Time (Vicat needle)-----------------------------
Fresh PropertiesSoundness-----------------------------
Fresh PropertiesSelf-Compacting Concrete - V-funnel test-----------------------------
Fresh PropertiesSelf-Compacting Concrete - L box test-----------------------------
Fresh PropertiesSelf-Compacting Concrete - Sieve segregation test-----------------------------
Fresh PropertiesSelf-Compacting Concrete - J-ring test-----------------------------
Fresh PropertiesBleeding-----------------------------
Fresh PropertiesCumulative Heat (by isothermal calorimetry @ 2D)-----------------------------
Fresh PropertiesCumulative Heat (by isothermal calorimetry @ 7D)-----------------------------
Fresh PropertiesCumulative Heat (by isothermal calorimetry @ 28D)-----------------------------
Fresh PropertiesCumulative Heat (by adiabatic calorimetry @ 2D-----------------------------
Fresh PropertiesCumulative Heat (by adiabatic calorimetry @ 7D)-----------------------------
Fresh PropertiesFresh State Strength-----------------------------
Placing & CuringShapingCastingCastingCastingCasting-----CastingCastingCastingCastingCasting---CastingCastingCastingCasting-CastingCastingCastingCastingCastingCasting-
Placing & CuringDe-AiringJoltingVibrationVibrationTapping-----VibrationJoltingVibrationVibrationJolting---JoltingJoltingJoltingJolting-VibrationVibrationVibrationTappingTappingVibration-
Placing & CuringCuringOther60°C & 100% Humidity20-22°C & 60-70% HumidityOther-----20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity---20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity-20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% Humidity20-22°C & 60-70% HumidityOther20-22°C & 60-70% Humidity-
Placing & CuringCuring After DemouldingOpenWrappedWrappedOpen-----WrappedWrappedWrappedWrappedWrapped----Wrapped---WrappedWrappedWrappedWrapped-Wrapped-
Hardened PropertiesStrength – Flexural (MPa) @ 2D-----------------0.90.92.162.4--------
Hardened PropertiesStrength – Flexural (MPa) @ 7D------------32.2----2.52.12.78---------
Hardened PropertiesStrength – Flexural (MPa) @ 28D-----------------------------
Hardened PropertiesStrength – Flexural (MPa) @ 90D-----------------------------
Hardened PropertiesStrength - Compressive (MPa) @ 1D-----------------1.91.83.952.79--------
Hardened PropertiesStrength - Compressive (MPa) @ 2D---19.92---------------------38.910.6--
Hardened PropertiesStrength - Compressive (MPa) @ 7D---47.01-------------7.055.65.93-----78.742722.8--
Hardened PropertiesStrength - Compressive (MPa) @ 28D1--52.89----55----------------93.979739.9--
Hardened PropertiesStrength - Compressive (MPa) @ 90D-----------------------------
Hardened PropertiesStrength - Pull-out (MPa)-----------------------------
Hardened PropertiesRel. 28d compressive strength (30% OPC replacement)-----------------------------
Hardened PropertiesElastic Modulus – Secant-----------------------------
Hardened PropertiesElastic Modulus - Dynamic-----------------------------
Hardened PropertiesDensity - Bulk-----------------------------
Hardened PropertiesPorosity - Apparent-----------------------------
Hardened PropertiesPorosity - True-----------------------------
Hardened PropertiesPorosity - Pore size distribution-----------------------------
Hardened PropertiesPorosity – (Air) Void size distribution-----------------------------
Hardened PropertiesPorosity – Void spacing factor-----------------------------
Hardened PropertiesPermeability – Water-----------------------------
Hardened PropertiesPermeability – Gas-----------------------------
Hardened PropertiesCapillary Water Absorption-----------------------------
Hardened PropertiesWater Retention-----------------------------
Hardened PropertiesWater-Soluble Chloride Content of Fresh Mortars-----------------------------
Hardened PropertiesShrinkage – Drying-----------------------------
Hardened PropertiesShrinkage – Ring test-----------------------------
Hardened PropertiesShrinkage – Autogenous-----------------------------
Hardened PropertiesShrinkage – Chemical-----------------------------
Hardened PropertiesHardness-----------------------------
Hardened PropertiesAbrasion resistance-----------------------------
Hardened PropertiesImpact resistance-----------------------------
Hardened PropertiesFire resistance-----------------------------
Hardened PropertiesThermal Resistance (heat transfer coeff)-----------------------------
Hardened PropertiesAcoustic Properties-----------------------------
Hardened PropertiesRecyclability Potential -----------------------------
Hardened PropertiesAutoclave length change (%)-----------------------------
Hardened Properties14 days mortar bar expansion (%)-----------------------------
DurabilityCreep in Compression-----------------------------
DurabilityResistance to Carbonation (app. Diff.)-----------------------------
DurabilityResistance to Chloride Ingress - Diffusion-----------------------------
DurabilityResistance to Chloride Ingress - Migration-----------------------------
DurabilityChloride Binding Capacity (g Cl/g binder)-----------------------------
DurabilityResistance to Acids – Acetic (organic) acid-----------------------------
DurabilityResistance to Freeze-Thaw without de-icing salts (internal damage)-----------------------------
DurabilityResistance to Freeze-Thaw with de-icing salts-----------------------------
DurabilityResistance to Weathering (?)-----------------------------
DurabilityResistance to UV-----------------------------
DurabilityDiscoloration-----------------------------
DurabilityEfflorescence-----------------------------
DurabilityLeaching - Monolith-----------------------------
DurabilityLeaching – Column test-----------------------------
DurabilityResistance to Alkali Silica Reaction (expansion)-----------------------------
DurabilitySulfate expansion - 6 months---------2.4-0.56------------0.12----
DurabilitySulfate expansion - 12 months-----------------------------
OthersEconomic cost (€)-----------------------------
OthersEnergy Consumption During Production (KWh/t)-----------------------------
OthersEnvironment Impact – CO2-equivalent-----------------------------